Tweet
Topic originally created by JeffLit on April 14, 2009 11:22 AM and viewed 4801 times in the old forum.
-
-
Originally posted by JeffLit on April 14, 2009 11:22 AM
It will be interesting to see what this hard to find item sells for. (no I am not the seller)
-
Originally posted by JBishop on April 14, 2009 12:41 PM
We need someone who has one of these to make a mold and run off copies. I do not have one. They were originally made by a company in Carpi near Modena. I can't recall the company name but I do have it written down somewhere. I tried to locate them to see if they still had the plastic injection mold but I could not locate them. Probably went out of business years ago and even if they didn't the steel mold was probably sold as scrap fo $10 years ago.
John
Comment
-
Originally posted by JeffLit on April 14, 2009 1:12 PM
The trouble is: they're flocked with some spray on felt stuff that would have to be removed from the master (thus altering it) and then we'd have to find a way of (re)spraying the felt to the original and new ones. I have no clue how to get that done. Also, the part is injection molded plastic, not fiberglass.
Comment
-
Originally posted by JBishop on April 14, 2009 7:03 PM
Jeff
I will see if I can find one here to see if it can be replicated. I know 4 or 5 C4 owners. I will se a few next week so I can ask then.
John
Comment
-
Originally posted by herb on February 5, 2014 4:17 PM
Hi Jeff, hi John, would need one of these too. Have you been successfull in replicating? thanks HerbertComment
-
Originally posted by BLS on February 6, 2014 4:43 AM
There's some form of a toolkit currently on ebay with a Buy it Now price of $1,380 USD (no, not my auction): http://www.ebay.com/itm/Ferrari-365-...#ht_561wt_1362 Not sure if this satisfies what you are looking for but figured it was worth a look for you. Probably not economical but the tools appear to be housed in the plastic/felt holders.Comment
-
Originally posted by JeffLit on May 15, 2014 11:49 PM
Another one has popped up on eBay. Buy it Now of $650.
Comment
-
Originally posted by sam231 on May 16, 2014 1:13 AM
The seller is good. I have bought a few things from him - quick delivery and condition as advertised. The holder looks in very good condition, especially since it still has a lot of the fuzzy coating (mine is almost gone).Originally posted by JeffLit
Comment
-
Originally posted by Ian Levy on May 16, 2014 6:14 AM
Hi
Mine has none of the flocked finish left on it .
Looks to have been deliberately cleaned of.
Does anyone know if these tool box holders are the same for Euro & US style tool lboxes
Regards
Ian L
Comment
-
Originally posted by herb on May 16, 2014 4:39 PM
Hi Ian, could not be patient and just bought it – hope it fits. If not somebody will need it hopefully. Saw your post HerbertComment
-
Originally posted by Ian Levy on May 23, 2014 3:04 AM
Does anyone have a toolbox holder that looks like this
Does anyone have any idea how I / we could get this finish?
Regards
Ian L
Comment
-
Originally posted by sam231 on May 23, 2014 5:17 AM
Hi Ian,
I just came accross this website and it might be what you need. They have a kit to apply suede-tex, a flockinhg for heavy duty use. Color chart indicated they have black. Might be worth a shot.
www.flockit.com
Cheers,
Sam
Comment
Comment